Home
  1. Tag "Making of"
Order By:   Views
final

Making of “Chaleur et paix” by Mohammed Khalil

Reference: I was looking for some references that could help me put things together. Basically I was aiming for a dramatic shot of an ancient passage, and so after doing some research I came up with these references: Modeling: Most of the objects in the scene were poly modeled. I believe poly modeling is more […]
3DM3
0
diapo_101

Making of Ferrari F2003 GA by tyio

Frame modelisation Patern found on www.f1-live.com Top view Side view/perspective First problem, the partern are not orthographique. So, i have made a cube with FIA data about lenght, etc the car have to respect. FILE EXE After, I have just build a basic spline cage, but I advice to use a polygonal modelisation because i […]
3DM3
0
coyotefinal

The Making of the “DMF – 239 Coyote” Missile

First of all here is a small introduction. I was briefed to build an aircraft-launchable missile, but this missile was special in that it had DMF capability (Dual Missile Fire). So this meant that I had to conceptualise a missile that could contain two smaller missiles inside itself, so that the mini-missiles could be fired […]
3DM3
0
FINAL

Making a image look evil

This tutorial is all about making a image look evil and pretty dark. Yeah we gonna take  a look at dark side of art, shall we? I have downloaded a picture of actress Livtyler. here it is. If you like above picture just copy and use it for this tutorial its free of cost only […]
3DM3
0
01

Making of Tundra

“I started the torso with a box, trying to get the right subdivisions to form the basic shape of the body. Then I extruded some polygons from shoulders and pelvis in order to create the arms and legs.”
3DM3
0
diet_pepsi_mountain_dew2

The Making of Diet Pepsi

The following paper provides a brief, detailed description of some of the technical aspects involved in producing the “Diet Pepsi After Hours” spot. A general/advanced knowledge of computer graphics and animation is recommended.
3DM3
0
image033

The Making of ‘RIO GRANDE’

    August 31, 2005 | Stryker This tutorial includes the most interesting and complicated steps of making the scene. The idea to create RIO GRANDE image came up to me while I was watching small copies of locomotives and steam locomotives at a shop. So when I came home I’ve decided to make one […]
3DM3
0
MazdaRX-8

The Making of Mazda RX-8

This is not a complete walkthrough tutorial, as it takes a lot of time to make one and besides, I have already finished the model quite a while ago. I will, however, try to give you some insight at how it was created from modelling to rendering so that it might provide you with some […]
3DM3
0
907testrender

The Making of Peugeot 907

        September 13, 2005 | Stryker At the start of July Peugeot design department comissioned me to do a series of illustrations depicting their new concept car for the 2004 Paris Motor Show, the 907 v12. I flew over to Paris to meet the designers for a full run down on the […]
3DM3
0
fenix

The Making of Phoenix building

In this tutorial I will go through my usual workflow with simple steps (trying to make it as simple as posible), to build a scene, from the preparation for the project (Pre-Pro) untill the final render, as always using Discreet 3D Studio Max, for the modelling, mapping and lighting, and Photoshop/Bodypaint for the texturing based […]
3DM3
0
Milando0035

The Making of Bruttus 4Z

I made some sketches for some of my concepts and others not because I used other cars as reference. The car that we’re talking about, in this article, is based on the marvelous and beautiful Mazda RX-8 as you may already noticed. I chose to base this one in RX-8 but I could’ve done sketches […]
3DM3
0
machineflesh

The Making of Oculus Medicus

This image was my contribution to CG Talk’s Machineflesh challenge that ran from 16 March to 18 June, 2004. The task was to “create an image depicting a mechanically altered or enhanced organic lifeform”. I had a feeling that there would be a lot of cyborgs and warriors submitted, so I opted for a different […]
3DM3
0
fig15

The Making of Ultimate Robot

The idea in to create this image and is conditioned from a video of bjork in which there was rather a Two similar Robots. Ok I will now explain you’ shortly as I have proceeded in the construction of such image.
3DM3
0
image001

The Making of Settled

Hi all, for some of those who requested a tutorial from me, well here it is. In this tutorial I’m going to tell you how my scene called ‘Settled’ was made. I assume you have at least the basic knowledge and understanding of 3d.
3DM3
0
main01

The Making of Lamborghini Gallerdo

This image was created for a personal project to brush up on my high-end skills, having only been working on lower poly game art for the past few years. The mesh is approximately 1.5 million polygons and Brazil r/s was used to render out the model.
3DM3
0
19

Making of ruins by Lukasz Szeflinski

This time I wanted to concentrate on proper texturing and realism. It took me 5 months of my free time to create this scene. My main goal was to recreate the already existing environment in 3d as accurately as possible to achieve a high degree of realism, just like in the movie production. I knew […]
3DM3
0
main_01

The Making of Old Alley

Hello there, this tutorial is the making of one of my latest scenes entitled “Old Alley.” This is my first making of tutorial, and I hope to create some more along the years.
3DM3
0
CLOSE